Integrated Corner Wrap Printer Applicator System with Reject Station
ID Technology has produced a standard labeling system to print and apply variable information labels to the trailing corner of cases and cartons. This product identification system utilizes standard "off-the-shelf" IDT components to construct a custom system.
The IDT integrated conveyor is made of stainless steel construction with a variable speed DC drive Baldor motor. Its integrated base has locking feet and casters allowing easy relocation of the entire system. An IDT TS1000 Vertical Post and IDT TS3000 Slide Base Assembly can be mounted to the conveyor beam, enabling X and Y axis movement of the applicator.
A Model 250 Label Printer Applicator prints and applies variable information labels to the side of cartons. A standard IDT secondary tamp is used to tamp the label onto the side of the carton and wipe it around the trailing edge corner.
An IDT System Scanner Interface verifies the barcode and either lets the case continue down the line or rejects it via the IDT reject station.
Product Brochure:
Product Photos:
Printer Applicator Trailing Edge Corner Wrap System
Trailing Edge Corner Wrap Label
Secondary Wipe Down Brush Attachment
Reject Station for Bad Read Labels
Reject Conveyor
ID Technology designs, manufactures and integrates custom identification systems and is recognized as a leading single-source provider for labeling, coding and marking equipment.
